Entries by admin

Marretti were profiled by the The Wall Street Journal

Marretti staircases were profiled by the The Wall Street Journal Mansion section over the weekend! For more details about our products, see our catalog here: https://app.box.com/v/marretti-2016 Read the full #WallStreetJournal article here: http://www.wsj.com/articles/stairs-that-kick-it-up-a-notch-1482250730

Architizier A+ Awards: “Special Mention” to Concorde staircase

The “Concorde” staircase has been awarded the Special Mention in the “Building products: access” category at the Architizer A+ Awards, a world famous architecture competition which assigns various prizes in different categories: houses, buildings, interior design, home appliances and much more.   Also last year another Marretti staircase, the “Origami” line, had been the winner of the Architizer A+ Awards […]

“Origami” wins an architecture world competition

The Origami staircase by Marretti has been awarded the “Architizer” architecture contest, attended by over 100 manufacturers from all over the world. Origami has won the A+ Award in the “Building products” category, as a result of a three-week online poll. Other categories were Accessories, Flooring, Facades, Lighting, Windows and another series of architectural sections. […]

Central i-beam frame in steel

Open staircase with central structure in coated iron made up of a stringer with a height of 160 with very thick cantilevered wooden steps with an oblique profile that follows the structure’s inclination. The staircase can also be supplied with a stringer with wooden inserts and a moulded step profile. In addition it is available in various colours […]

ICFF – New York, 16-19 May 2015

Marretti will take part to ICCF construction fair, to be held in New York on May 16th to 19th 2015. Over 500 exibitors from 30 foreign countries will participate, covering products categories which range from office, kitchen, bathroom and living room furniture, and much more. Our stand location is “2731 (L3)” and can be found […]

AD Home Design Show – New York, 19-22 March 2015

The stairs Marretti will be exhibited at the Architectural Digest Home Design Show in New York, from 19 to 22 March 2015. The Italian company will present some novelties of 2015 and will again present his evergreen pieces, those stairs that led the brand Marretti worldwide and never go out of fashion. The fair is […]

Interior Design Show – Toronto 22-25 January 2015

Our company will be present at the Interior Design Show in Toronto, which is held from 22 to 25 January 2015. The fair, this year in its seventeenth edition, offers three full days of “design experience”, starting from opening night party, Thursday evening, and continuing with the first full day dedicated to the “professional trade […]

Wing-shaped Open Cantilever Staircase

The WING-SHAPED cantilever staircase comprises wooden steps that come in different types of wood (Beech, Oak, Doussie, Wenge, Teak, Iroko) and with several finishes (oil, bleached, polyurethane varnishes, etc). Otherwise, they can be resin coated in any colour to the customer’s sample or to preference from our catalogue. The steps are also supplied with “Gold […]

Compon Closed Wooden Staircase

The COMPON wooden staircase comprises steps veneered in wood that can be supplied in various types (Beech, Oak, Doussie, Wenge, Teak, Iroko) and with several finishes (oil, bleached, polyurethane varnishes, etc). A bearing wall is necessary to anchor the steps. The COMPON staircases can be supplied with closing between the steps, with lights or with […]

Concorde Light with led

Concorde staircase with leds in self-bearing wood and Plexiglas with led lights fitted in the Plexiglas, featuring an exclusive and unique design. It will be possible to have it with various finishes of the wood also with staining to sample.

Concorde Staircase

Concorde model staircase in self-bearing wood with an exclusive and unique design. It will be possible to have it with various finishes of the wood also with staining to sample, or coated with “Travertine Marble” type resin and lots of other colours.

“Origami” staircase

New ORIGAMI model cantilever staircase made from CORTEN and featuring an exclusive and unique design, with ultrathin thickness of 8 mm. It is available in different finishes, such as “rust”, varnished and also painted in sample colours, or with resin coating in faux “Travertine Marble”, and in many other colours. The banisters can be selected […]

Cantilever Staircase “Cloud”

The NUVOLA cantilever staircase features steps in different types of wood (Beech, Oak, Doussie, Wenge, Teak, Iroko), and in a variety of finishes (oil, bleached, polyurethane paints, etc.). They can also be coated with resin or CORIAN (a new material by DUPONT) in any colour selected from our catalogue. All our banisters can be fitted […]

Spiral staircases with helical structure

Circular staircase with only one helix-shaped inner side structure in stainless steel, with exclusively-designed petal-shaped steps, in ultra-clear tempered 10+10+10 triple layer glass, also available with other finishes, such as satinised, acid-treated and slip-proof glass, or with wooden steps from 52 mm in thickness in various types of wood like Beech, Oak, Doussie, Iroko, Teak, […]

Modular wooden stairs

Self-bearing modular wooden staircase with an exclusive and unique design. It will be possible to have it with various finishes of the wood also with staining to sample, or partly coated with stainless steel.

Spiral staircase covered with resin

The stainless steel and resin spiral staircase is composed of resin-coated wooden steps that can be supplied in various finishes and colours also to sample. The step thickness is variable (42-52 mm) in relation to the staircase diameter (Ø from 100 cm to 300 cm). The metal parts are completely made of seamless stainless steel, […]

Exterior Banisters

The exterior banisters are completely made of AISI 316 stainless steel with polished finish only. The banister attachment can be outside the step, on the step or on the sloped surface and it can be supplied with solid transversal stainless steel rods Ø 10 mm. There can be 5 rods with a banister height of […]

Decor Interior Banisters

The Decor interior banisters are completely made of AISI 303-304 stainless steel with no welds but with mechanical fastenings or with copper and brass. The Decor banister is divided into Gaudì with 3 branches completely made of stainless steel or copper-stainless steel-brass, Gaudì with double curved post completely made of stainless steel, Gaudi with straight […]

Structural Glass Banister

The glass that forms the banister is toughened and laminated and is 24 mm or 20 mm in thickness (2 layers of toughened glass 10/12 mm each and one 0.6 mm PVB film between them) and the finish can be extra-light, float, satinised, soured or coloured. The stainless steel used in the system is type […]

Interior Banisters

The interior banisters (registered model) are completely made of AISI 303-304 stainless steel without welds but with mechanical fastenings. The banister attachment can be outside the step, on the step or on the sloped surface and it can be supplied with solid transversal stainless steel rods Ø 10 mm. There can be 5 rods with […]

Stainless Steel Staircase With Bands

The staircase with bands made of satinised 12 mm gauge stainless steel has no fastening screws in the parts in view, with scotch bright finish. The steps can be made of toughened and laminated glass with a thickness that can vary between 26 and 32 mm depending on the width of the staircase. Extra-light, float, […]

Stainless Steel only Staircase with Bands

The staircase with 12 mm gauge satinised stainless steel band structure has no fastening screws in the parts in view, with scotch bright finish. The steps are made of 6 mm gauge satinised stainless steel folded at a right angle above and below to give the structure higher torsional rigidity. The staircases are tested with […]

Stainless Steel Modular Staircase

The staircase with stainless steel modular structure has no fastening screws in the parts in view. The steps can be made of toughened and laminated glass with thickness that can vary between 26 and 32 mm depending on the width of the staircase. Extra-light, float, satinised or coloured finish, in marble, stone and wood of […]

Painted Iron Staircase with Central Structure

The staircase with painted iron central structure is made of tubular iron with a 100 x 100 mm cross-section with 4 mm iron plates folded to obtain higher torsional rigidity, the structure is very stiff, with no fastening screws in the parts in view. It can be painted to the customer’s sample or to preference […]

Painted Iron Staircase with Bands

The staircase with band structure made of painted iron 12 mm in thickness has no fastening screws in the parts in view. It can be painted according to the customer’s sample or to preference from our catalogue. The steps can be made of toughened and laminated glass with thickness that can vary between 26 and […]

Staircase with Structural Glass and Wooden Steps

The staircase will have wooden steps that come in various types (Beech, Oak, Doussie, Wenge, Teak, Iroko) and with several finishes (oil, bleached, polyurethane varnishes, etc). The thickness of the step and riser can vary (73-80 mm) depending on the width of the staircase. The stainless steel used in the system is type AISI 303/304 […]

Stainless Steel-wood Spiral Staircase

The wooden-stainless steel spiral staircase comprises wooden steps that come in various types of wood (Beech, Oak, Doussie, Wenge, Iroko, Teak) and with several finishes (oil, bleached, polyurethane varnishes, etc.). The thickness of the step can vary (42-52 mm) depending on the diameter Ø of the staircase between 100 cm and 300 cm. The metal […]

Stainless Steel Spiral Staircase

The stainless steel spiral staircase comprises beech wood steps plated with a 2 mm satinised stainless steel plate with no visible welds. The thickness of the step and riser can vary (42-52 mm) depending on the diameter of the staircase. The metal parts are completely made of stainless steel with no welds and are assembled […]

Open Wooden Cantilever Staircase

The wooden-stainless steel staircase comprises wooden steps supplied in various types of wood (Beech, Oak, Doussie, Wenge, Teak, Iroko) and with several finishes (oil, bleached, polyurethane varnishes, etc). The thickness of the step and riser (73-80 mm) can vary depending on the width of the staircase. A bearing wall is necessary to anchor the steps. […]

Closed Wooden Cantilever Staircase

The wooden steps of the stainless steel-wood cantilever staircase come in various types of wood (Beech, Oak, Doussie, Wenge, Teak, Iroko) and with several finishes (oil, bleached, polyurethane varnishes, etc). The thickness of the step and riser (73-80 mm) can vary depending on the width of the staircase. A bearing wall is necessary to anchor […]

Resin-coated Wooden Cantilever Staircase

The resin-coated wooden cantilever staircase comprises beech wood steps coated with resin in any colour to the customer’s sample or to preference from our catalogue. The thickness of the step and riser can vary (73-80 mm) depending on the width of the staircase. A bearing wall is necessary to anchor the steps. The metal parts […]

Stainless Steel Plated Wooden Cantilever Staircase

Wooden cantilever staircase plated with stainless steel composed of beech wood steps plated with a 2 mm satinised stainless steel plate with no visible welds. The thickness of the step and riser can vary (73-80 mm) depending on the width of the staircase. A bearing wall is necessary to anchor the steps. The metal parts […]

Nautical Style Glass Cantilever Staircase

The glass that forms the step is toughened and laminated with a thickness of 32 mm (3 layers of toughened glass 10 mm each and 2 films of 0.6 mm PVB between them) and the finish can be extra-light, float, satinised, soured or coloured. The stainless steel used in the system is type AISI 303/304 […]

Staircase with Wooden Bands and Glass Steps

The staircase with solid wood band structure 60 mm in thickness has no fastening screws in the parts in view. It can be painted according to the customer’s sample or to preference from our catalogue. The steps can be made of toughened and laminated glass with a thickness that can vary between 26 and 32 […]

Staircase with Wooden Bands and Wooden Steps

The staircase with solid wood band structure 60 mm in thickness has no fastening screws in the parts in view. It can be painted according to the customer’s sample or to preference from our catalogue. The steps and wooden structure can be supplied in various types of wood (Beech, Oak, Doussie, Wenge, Teak, Iroko) and […]

Stainless Steel and Glass Spiral Staircase – Skywalk

The stainless steel and glass spiral staircase comprises steps made of toughened and laminated glass (3 layers 10 mm each and 2 0.6 mm PVB films between them). The toughened and laminated steps can have several finishes (Extra-light, Satinised, Soured, Coloured, etc.) and grooves or non-slip strips on request. The metal parts are completely made […]

Glass Cantilever Staircase

The glass that forms the step is toughened and laminated with a thickness of 32 mm (3 layers of toughened glass 10 mm each and 2 films of 0.6 mm PVB between them) and the finish can be extra-light, float, satinised, soured or coloured. The stainless steel used in the system is type AISI 303/304 […]